• Phoenix System Replacement Bracket Set: Replacement Bracket set for your System Trolley.
• All in One Replacement Bracket Set: Replacement bracket set for your All in One bags – includes new Twinset Lite and original Twinset and Compact designs.
• Replacement Sleeve Set: For all Phoenix Bags – including original Twinset and Compact designs.
• Replacement Phoenix System Trolley Tubes – Pair of tubes only for the System Trolley. Should any other section of your trolley be damaged (excluding bracket which can be purchased above) please contact us for assistance at info@phoeinxinstinct.com

If you require a new adaptor for your Phoenix bags please visit our adaptors page.

The post Replacement Parts appeared first on Phoenix Instinct.

Designed to fit the Phoenix Trolley (not included).

• Rucksack: 44cm x 26cm x 11cm – Weight: 0.4kg – 12L Capacity
• Shopping: 60cm x 35cm x27cm – Weight: 1.0kg – 38L Capacity
• Cabin: 53cm x 35cm x 22cm – Weight: 1.4kg – 38L Capacity
• Large: 75cm x 35cm x 22cm -Weight: 1.8kg – 55L Capacity
• XL: 85cm x 35cm x 27cm – Weight: 2.1kg – 78L Capacity

Purchase additional sized Phoenix System bags to fit your Phoenix Trolley System. Phoenix System Bags can be connected together to increase capacity and split lifting weight into two pieces.

The post Phoenix Bags appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with All in One Twinset Lite and Phoenix System Cabin. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Cabin and Hold Bundle prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models.
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Twinset Lite is only compatible with the Phoenix System Cabin Bag (Trolley required) and the System Rucksack.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you don’t or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Cabin and Twinset Bundle appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with the System Trolley. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Phoenix System prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Phoenix System Trolley or Bags are not compatible with the bags from the All in One range.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you dont or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Phoenix System Full Set Multibuy appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with the System Trolley. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Phoenix System prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Phoenix System Trolley or Bags are not compatible with the bags from the All in One range.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you dont or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Phoenix System Shopping Bag appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with the System Trolley. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Phoenix System prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models.
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Phoenix System Trolley or Bags are not compatible with the bags from the All in One range.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you dont or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Phoenix System XL Bag appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with the System Trolley. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Phoenix System prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Phoenix System Trolley or Bags are not compatible with the bags from the All in One range.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you dont or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Phoenix System Large Bag appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with the System Trolley. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

Phoenix System prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar compatibility option 19-22mm dia connects directly to your backrest bar. Straight bar 23mm and 25mm diameter bars will include a adaptor that attaches to your bar. Includes some Quickie / Sopur, Ottobock models.
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you don’t or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Phoenix System Cabin Bag appeared first on Phoenix Instinct.

Most wheelchairs with a straight backrest bar (rigidiser) are easy click compatibility with All in One Twinset Lite. However, some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar. If an aftermarket backrest is used you may not have the min 25mm clearance and require a low clearance adapter sold separately.

To check if you require an adapter please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

All in One Twinset Lite prices vary as they include different adaptors.

Quick guide to choosing compatibility.

• If your chair does not have a backrest bar or the bar is not round in shape a universal adapter will be included with your order. These include all folding frames and some rigid frames – Kuschall K, Panthera X, Motion Composites Apex, Aria.
• Straight bar options connect directly to your backrest bar 23mm and 25mm diameter bars will include a wide fitting. Includes some Quickie / Sopur, Ottobock models.
• Curved bar (the bar is not straight in the middle) includes some Ti-lite and RGK models. Quickie / Sopur oval tube/rubber grip, Nitrum, Krypton models will include an adapter to fit to the wheelchair.

The Twinset Lite is only compatible with the Phoenix System Cabin Bag (Trolley required) and the System Rucksack. It is not compatible with other bags in the System range.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you dont or have a different bar diameter you will require a universal adaptor and should order compatibility option “folding and frames with no back bar” so you receive this adaptor with your order.

The post Twinset Wheeled Hold Bag and Rucksack appeared first on Phoenix Instinct.

Helium/Q7 Oval Adapter: For Quickie/Sopur chairs with rubber handles or an oval-section back bar.

Helium/Q7/Argon 2 Round Adapter: For Quickie/Sopur chairs with straight, round tubed backrest bars.

Universal Adapter: For chairs without a backrest bar or standard round tube back bar—fits all folding frames and some rigid frames (e.g. Kuschall K, Panthera X, Apex C, Aria). Made from lightweight carbon fibre and compatible with all Phoenix bags. Download the Universal Adapter User Guide.

Krypton/Nitrum Adapter: Designed for these models to create a straight bar for attaching the All in One Twinset Lite or System Trolley.

RGK SUB4 Kit: SUB4 chairs are custom-built, so a one-size-fits-all solution isn’t possible. Most have either a 19mm or 22mm round backrest bar. This kit includes fittings for both sizes. Please ensure there’s at least 30mm of space between the bar and backrest. If there’s less space or your bar has a different diameter, you’ll need the Universal Adapter.

The post Adapters appeared first on Phoenix Instinct.