Adapters

£25.00£50.00

Use this page for extra adapters or if you require a low clearance adapter. Adapters for Curved back bars, Quickie oval tube bars, Krypton and Nitrum are included with your bag when ordering.

Low clearance adapters are used on straight backrest bars when there is less than 25mm space between the backrest bar and the backrest (commonly used when rigid backrests are fitted).

Please measure your bar diameter so that we can send you the correct size of adapter. We have a measuring tool below if required.

If you require an adapter for extra large diameter or other reasons please contact us.

Quickie Helium/ Q7 oval tube adapter is used on Quickie/Sopur chairs with a rubber handle and/or an oval section in the middle of the back bar.

23mm Bracket Sleeves can be used on Quickie Helium/Q7/Argon2 round tube bars.

Quickie/ Sopur Krypton and Nitrum adapters now available. These attach to the Krypton/Nitrum backrest bar creating a straight bar to attach your All in One Twinset Lite or System Trolley.

Some wheelchair brands use sizes and shapes of tubing that require an adapter or don’t have a backrest bar. A minimum of 25mm is needed between backrest and backbar to attach a Phoenix bag. If an aftermarket backrest is used you may not have the minimum 25mm clearance and require a low clearance adapter.

To check the size of adapter you require please use our downloadable Measuring Tool and follow these instructions Measuring Tools Instructions.

If you have a folding framed chair, no back rest bar or use a Kuschall K, Apex Carbon, Panthera X or Aria you will require our Universal Adapter.

Please note Phoenix System and All in One Twinset Lite compatibility options include adapters. For example Quickie/Sopur Nitrum compatibility option includes the Nitrum adapter. Please email us at info@phoenixinstinct.com if you need assistance.

RGK SUB 4 – As SUB4 chairs are made to measure it can be difficult for us to make a one size fits all compatibility option. Sub 4 chairs tend to have either a 19mm or 22mm round tubed diameter back bar so we have made up a kit which will give you options to fit these bar sizes. Please note you must have a space of at least 30mm between bar and backrest to use this adaptor kit. If you don’t or have a different bar diameter you will require a universal adaptor.

You may also like…

Scroll to Top